SIEMENS
2/14
Siemens NC 62 · 2016
SINUMERIK CNC
SINUMERIK I/O
SINUMERIK PP 72/48D PN and PP 72/48D 2/2 A PN I/O modules
2
■
Overview
The SINUMERIK PP 72/48D PN I/O module is available in a
digital variant with 72 inputs and 48 outputs, and in a digital/
analog variant PP 72/48D 2/2A PN with an additional 2 analog
inputs and 2 analog outputs.
The I/O modules are connected to the CNC via a
PROFINET-based I/O interface. The digital inputs and outputs
are connected by means of three 50-pin ribbon cables. Terminal
strip converters can be used or the direct connection of distri-
bution boards, for example, is possible.
■
Benefits
7
Easy connection via PROFINET-based I/O interface
7
Mounting plate for easy module installation in the control
cabinet
7
Automatic module detection by the CNC, no complex
configuring required
7
Easy connection of terminal strip converters to plug
连接器
7
Integrated 24 V DC power supply with electrical isolation
between the inputs and outputs and PROFINET
■
Integration
The PP 72/48D PN and PP 72/48D 2/2A PN I/O modules can be
used for the SINUMERIK 840D sl CNC.
Connection overview for SINUMERIK I/O module
PP 72/48D PN/PP 72/48D 2/2A PN
For information on the cables and length codes, refer to section
MOTION-CONNECT connection systems.
SINUMERIK
I/O module
PP 72/48D PN/
PP 72/48D
2/2A PN
SINUMERIK
MCP 310C PN/
MCP 483C PN
I/O module
PP 72/48D PN/
PP 72/48D
2/2A PN
Power supply
Analog inputs
(up to 2)
1)
Analog outputs
(up to 2)
1)
Ribbon cable
PROFINET
Digital I/O
Analog I/O
X3
24 V DC
X2 port 1
X2 port 2
X111
X222
X333
6SL3060-4A..0-0AA0
(in fixed lengths)
≤ 5 m (1.64 ft)
6FX2002-1DC00-1..0
(by the decimeter)
≤ 70 m (230 ft)
X1
Article No.
Pre-assembled cable
G_NC01_EN_00409e
1)
With PP 72/48D 2/2A PN only.
Terminal strip
converter
1)
SIMATIC DP
PN/PN coupler
SINUMERIK
828D/828D BASIC/
840D sl
© Siemens AG 2016