SIEMENS
5/104
Siemens NC 62 · 2016
5
SINAMICS S120 drive system
SINAMICS S120 Combi
Power Modules
■
Overview
SINAMICS S120 Combi Power Module
SINAMICS S120 Combi is a very compact and rugged drive
concept tailored for compact turning and milling machines.
SINAMICS S120 Combi integrates a line infeed with regenerative
feedback capability, power units for spindle and feed motors
as well as a TTL encoder interface into a single Power Module.
The SINAMICS S120 Combi Power Modules are optimized as
a drive for machine tools with 3 to 6 axes. The Power Modules
are available with external air cooling. SINAMICS Motor Modules
in booksize compact format are used as expansion axes.
■
Benefits
7
Compact multi-axis module with line infeed with regenerative
feedback capability and power units for 3 or 4 axes
7
Customized drive system for compact standard turning and
milling machines
7
Requires very little mounting space in control cabinet incl.
fan unit, shield terminals and ventilation clearances
7
Optimized for weak supply networks with frequent under-
voltage, network imbalances and large frequency fluctuations
7
Optimized for harsh operating conditions with increased
cabinet temperature and increased humidity
7
Rugged Power Modules resistant to short circuits, overvoltage
and ground faults
7
Rugged and easy-to-fit screw-type terminals with
integrated shield connection for the power cables
7
Perfectly designed for expansion using additional Motor
Modules in booksize compact format
7
Low energy consumption thanks to state-of-the-art 400-V
technology
7
Excellent dynamic response and machining precision thanks
to Dynamic Servo Control (DSC)
7
Simple cabling due to intelligent DRIVE-CLiQ interface
7
Very simple commissioning thanks to predefined topologies
■
Function
•
Power Module with 3 or 4 integrated power units
•
Integrated line infeed with regenerative feedback capability
•
Integrated TTL encoder interface
•
Integrated motor brake control for one axis
•
Integrated fan power supply
•
Line supply voltage 380 to 480 V 3 AC
•
Supply types TT, TN and IT
•
Integrated shield terminals
•
Heat dissipation concept with an external heatsink for
extremely low power losses in the control cabinet
•
Easy-to-mount fan module optimized for harsh environments
•
Increased availability thanks to fan monitoring
•
Derating only from 45 °C (113 °F) cabinet temperature
•
Power cables are connected by means of screw-type
terminals
■
Integration
The following components can be connected to the
SINAMICS S120 Combi drive system:
•
SINUMERIK 828D BASIC
•
SINUMERIK 828D
•
3或4轴/饲料马达
•
3 or 4 motor encoders
•
3 or 4 direct encoders via DMC20
•
Direct spindle encoder directly to TTL or sin/cos via SMC20
•
External fan module
•
Up to two additional SINAMICS S120 Motor Modules in
booksize compact format via DC link connection and
24 V DC busbars
•
Braking Module with braking resistor via DC link connection
•
Control Supply Module via DC link connection and
24 V DC busbars
•
One safe motor brake control
•
5 or 6 DRIVE-CLiQ sockets
•
24 V electronic power supply via connector
•
1 safe standstill input for the infeed (Enable Pulses)
•
1 safe standstill input for the spindle and feeds
(Enable Pulses)
•
1 temperature sensor input for the spindle
(KTY84-130/PT1000 or PTC)
•
PE connections
The scope of supply of the SINAMICS S120 Combi Power
Modules includes:
•
SINAMICS S120 Combi Power Module
•
Accessories pack consisting of:
- 4 DRIVE-CLiQ dust-proof blanking plugs
- Connector X224 for the electronics power supply
- Connector X11 for motor brake control
- Connector X21 Enable Pulses infeed
- Connector X22 Enable Pulses drives/temp.
- 5 shield terminals for power cables
- Shield terminal for signal cable
© Siemens AG 2016