西门子
3/25
西门子NC 62·2016年
SINUMERIK操作
操作员面板
SINUMERIK TCU 30.2.
3.
■
Overview
SINUMERIK瘦客户机单元TCU 30.2分布式
installation allows the OP 019 operator panel front and the
SINUMERIK PCU或SINUMERIK NCU分开安装。
This is made possible by copying the user interface to one or
several operator panel fronts, each with a
SINUMERIK TCU 30.2..
■
Benefits
7.
浅装置设计扁平操作面板
深度和低功耗
7.
SINUMERIK PCU的低振动安装
控制柜子
7.
使用多达5个制服的较大机器的高效操作
operator panels simultaneously – of which 4 are Thin Clients
7.
Effective operation of interlinked machines – more than
4薄客户端操作面板可以通过
抑制机制
■
设计
SINUMERIK TCU 30.2连接到
Sinumerik PCU / NCU通过工业以太网作为瘦客户端
own subnet via DHCP server.
Graphics:
Resolution 1280 × 1042 pixels (SXGA), 16-bit color depth
港口：
•
5×USB 2.0，用于连接鼠标，键盘和
U盘
•
工业以太网10/100/1000 Mbit / s
■
功能
•
SINUMERIK PCU之间的信号传输，
SINUMERIK NCU和操作员面板通过工业前线
以太网
•
Easy installation and service-friendly layout thanks to the
component structure
•
SINUMERIK PCU的功能在集中配置 -
uration, e.g. number of PCI slots. The same operating screen
在所有操作员面板前面同步显示
从所有操作面板前面使用。操作员输入
瘦客户机对操作员输入具有相同的优先级
operator panel directly connected to the SINUMERIK PCU.
The operator panel in passive mode shows a darkened
screen.
•
Operation is possible on the active operator panel. An
enabling function permits a passive operator panel to request
operation.
•
The combined operation of operator panel fronts on a
SINUMERIK TCU or with an integral TCU and an operator
panel front directly connected to the SINUMERIK PCU is
possible.
•
与操作面板前部的距离由
maximum distance between two network nodes/access points
(100 m/328 ft).
■
一体化
SINUMERIK TCU 30.2可用于：
•
SINUMERIK 840D sl:
NCU 710.3B PN/NCU 720.3B PN/NCU 730.3B PN
•
SINUMERIK OP 019 operator panel front
•
SINUMERIK PCU 50.5 Windows 7
© Siemens AG 2016