SIEMENS
Sinamics S150 NEMA
Engineering Tools, Service & Support
4
西门子D21.7(第2部分) - 2015年
驱动器控制图(DCC)
驱动器控制图(DCC)expands the scope of device
functions by means of freely available closed-loop control,
计算和逻辑模块,并提供了一种手段
technological functions can be graphically configured in the
SINAMICS S120 drive system. DCC is installed as an additional
应用于入门委员会工具。
驱动器控制图扩大了非常简单的可能性
配置技术功能,均用于模拟
运动控制系统以及Sinamics S120
驱动系统。对于用户,这打开了一个新的维度
关于提到的系统的适应性
specific functions of their machines.
DCC对可用数量没有任何限制
functions; this is only limited by the performance capability of
目标平台。
用户友好的DCC编辑器启用了简单的基于图形的简便
configuration, allows control loop structures to be clearly
represented and provides a high degree of reusability of
diagrams that have already been created.
The open-loop and closed-loop control functions are defined
通过使用多种能力的块(驱动器控制块
(DCBs)) from a pre-defined library (DCB library) that are
选择并以图形方式链接
dragging and dropping. Test and diagnostic functions
允许对程序行为进行验证,并在情况下进行
of a fault, the cause identified.
The block library encompasses a large selection of closed-
loop, arithmetic and logic blocks, as well as comprehensive
开路和闭环控制功能。
For logically combining, evaluating and acquiring binary
信号,所有常用的逻辑功能都可以使用
selection (AND, XOR, on/off delay, RS flipflop, counter, etc.).
多种算术功能,例如绝对功能
价值产生块,分隔线和最小/最大
评估可用于监视和评估数值
quantities. In addition to the closed-loop drive control, axial
winder functions, closed-loop PI controllers, ramp-function
generators or wobble generators can be configured simply
很容易。
Drive Control Chart for SINAMICS S120 also provides a
convenient basis for resolving drive-level open-loop and
转换器中的闭环控制任务。进一步
扩展了使辛米亚学适应特定的可能性
应用。驱动器中的本地数据处理支持
实施模块化机器概念并导致
an increase in the overall machine performance.
最低硬件和软件要求
由于安装了DCC,请参阅入门工程软件
除此之外。
DCC包括图形配置工具(DCC编辑器)和
块库(DCB库)。
除了侦察兵或入门者之外,还安装了DCC
工程软件。
The engineering license required for each PC (floating) for
DCC is purchased at the same time the order is placed;
additional runtime licenses are not required.
DCC可以分为两个版本:作为模拟版本
and SINAMICS applications, or as version for SINAMICS
仅申请。
DCC v2.1的现有许可也可用于DCC v2.2 SP1。
An upgrade variant for the engineering license can be
selected for existing DCC V2.0 versions.
描述
订单号。
DCC V2.3
for STARTER V4.4
Graphic configuring with Drive
Control Chart
DCC编辑 + DCB标准库
用于Sinamics S120/S150
• Single Engineering License,
与数据载体
•升级工程许可证,
与数据载体:
The DCB Extension blocks are also
configured by means of the graphic
配置工具(DCC编辑器)。
The use of these blocks requires
a runtime license.
6AU1810-1HA23-0XA0
6AU1810-1HA23-0XE0
SINAMICS DCB Extension License
依赖的运行时许可证
filmware v4.6及更高
6SL3077-0AA00-0AB0
选择和订购数据(选项)
4/5