SIEMENS
13/39
西门子D 21.4·2017
工具和配置
配置注释
System components
13
■
配置
(continued)
Braking Modules and braking resistors for booksize format
运营书籍格式制动模块，最少
capacitance is required in the DC link. This capacitance is
由使用的制动电阻确定。
制动电阻0.3 kW/25 kW
→
DC link capacitance 220
μ
F
制动电阻1.5 kW/100 kW
→
DC链接电容330
μ
F
书籍的电容大小格式制动模块
110
μ
F is included in the total capacitance value. If the DC link
capacitance is not sufficient for the use of one or more Braking
Modules, a Capacitor Module can be added to increase the
effective DC link capacitance of the drive line-up.
When booksize format Braking Modules are connected in
parallel, the minimum capacitance specified above must be
可用于每个制动模块。
笔记
：只有直接连接的预订格式模块
to each other via the DC link busbar can be included in the total
capacitance.
如果直流链路电容不足以操作
制动模块，电容器模块的数量可用于
增加直流链路电容。最大允许的直流链接
capacitance of a drive line-up on a Line Module must be taken
考虑到。最大DC链接电容
帐户在线模块上的预充电电流限制
在线模块的技术规格中列出。
制动电阻从
DC链接：
Duty cycle for braking resistors
Braking Modules and braking resistors for chassis format
Braking Modules with a braking power of 25 kW (for frame size
FX) and 50 kW (for frame sizes GX, HX and JX) are available with
匹配机箱格式单元的制动阻力。制动单元
can be connected in parallel to obtain higher braking powers. In
在这种情况下，可以在线模块端安装单元或
Motor Module end.
When a Braking Module is installed in a Basic Line Module of
size GB/GD, the cables supplied for the DC link connection are
太短。在这种情况下，电缆线束套件
6SL3366-2NG00-0AA0 must be ordered to make the Braking
Module connection.
The Braking Module features an electronics interface (X21) with
monitoring function. The braking resistor housing contains a
监测热环境。这两个监视器都可以是
在驱动系统的警告或关闭电路中磨碎。
制动模块和制动电阻要求的计算
•
对于周期持续时间的周期性占空环
≤
90s, the
在这个占空比内制动能力的平均值必须
be defined. The relevant cycle duration must be applied as
the time base.
•
对于周期持续时间的周期性占空环
≥
90s or for
sporadic braking operations, a time interval of 90 s in which
the highest average value occurs must be selected. The 90 s
period must be applied as the time base.
除了平均制动功率，所需的峰值
制动时也必须考虑制动能力
选择单元（制动模块和制动电阻器）。
P
最大限度
P
0 kW
t
0 kW
t
a
t
t
a
t
S制动期限
t
a
load duration in s
P
DB
Continuous power of braking resistor in kW
P
最大限度
KW中制动电阻的峰值功率
G_D212_EN_00018A
P
DB
框架
size
Rated power
P
DB
power
峰值功率
P
15
Max. possible
mounting
位置
Braking
Module
FB
25 kW
125 kW
1
GB/GD
50kW
250 kW
1
FX
25 kW
125 kW
1
GX
50kW
250 kW
1
HX
50kW
250 kW
2
JX
50kW
250 kW
3
© Siemens AG 2017