西门子
13/7
Siemens D 21.4 · 2017
Tools and configuration
工程工具
Sinamics驱动器控制图（Sinamics DCC）
13
■
概述
Sinamics驱动器控制图（Sinamics DCC）expands the
scope of device functions by means of freely available closed-
loop control, arithmetic and logic blocks and offers a means by
哪些专有技术功能可以图形
configured in the SINAMICS drive system. In addition, local data
processing in the drive supports the implementation of modular
机器概念并导致整体MA-
Chine性能。Sinamics DCC是高级的一部分
技术功能，并安装为
STARTER commissioning tool.
Sinamics DCC为用户提供了更大的整体范围
adapt systems to the specific functions of their machines.
Sinamics DCC不会限制可以
be used. The number of functions is limited only by the perfor-
控制单元的MANCE能力。
SINAMICS DCC is available for the following SINAMICS drive
systems:
•
SINAMICS G130 and SINAMICS G150
•
Sinamics S120和Sinamics S150
•
SINAMICS DCM and SINAMICS DCP
•
SINAMICS GM150 and SINAMICS SM150
•
Sinamics GL150和Sinamics SL150
The user-friendly DCC editor enables easy graphics-based
configuration, allows control loop structures to be clearly repre-
sented and provides a high degree of reusability of diagrams
that have already been created.
The open-loop and closed-loop control functions are defined
通过使用多种能力的块（驱动器控制块
(DCBs)) from a library (DCB library) that are selected and
graphically linked with one another by dragging and dropping.
测试和诊断功能允许程序行为
可以验证，如果发生故障，则确定的原因。
Two types of DCB library are available, i.e. DCB Standard and
DCB扩展。DCB标准库提供
Sinamics DCC包含大量闭环，
算术和逻辑块，以及全面的开放 -
loop and closed-loop control functions.
用于逻辑结合，评估和获取二进制信号，
all commonly used logic functions are available for selection
(AND, XOR, on/off delay, RS flipflop, counter, etc.). A wide range
of arithmetic functions, such as absolute value generation,
dividers and minimum/maximum evaluation are available to
monitor and evaluate numerical quantities.
In addition to the closed-loop drive control, axial winder functions,
PI controllers, ramp-function generators or wobble generators are
simple to configure.
SINAMICS DCC also offers the DCB Extension library from firm-
ware version V4.6 and higher. This contains an extended range
在该块中用作附加的独立库
DCC编辑。它包括GMC和数学扩展库。
The GMC contains Motion Control blocks (GEAR, POSMC,
CAMD, etc.).
With Math Extended, supplementary mathematical and logical
制作功能块（ASIN，ACOS，ATAN，LOG等）
available.
这些库可以与应用程序一起下载
examples from the Siemens Application Support website.
Further information can be found in the Drive Applications
section.
以及使用库的选项
DCB Extension, DCB Extension proprietary libraries can also be
created with custom-programmed blocks. These blocks and
图书馆与单独的Sinamics DCB编程
Studio development tool in the C/C++ high-level language and
可以用作DCC中自己的DCB扩展库
editor. Use of these blocks as DCB extensions requires a runtime
执照。
单独的Sinamics DCB Studio开发工具是重新的
quired for programming the blocks and generating the library as
a DCB Extension.
最低硬件和软件要求
See STARTER commissioning tool.
■
Selection and ordering data
SINAMICS DCC comprises the graphical configuring tool (DCC
编辑）和DCB标准库。Sinamics DCC已安装
as an add-on to the STARTER commissioning tool.
The necessary engineering license for each PC (floating) for
Sinamics DCC是在下达订单的同时获得的。
No runtime license is required for the DCB standard library
included in the scope of supply.
Existing licenses for SINAMICS DCC V2.1, V2.2 SP1 and V2.3
SPX也适用于Sinamics DCC v2.4 SP1。
升级版本，包括
使用启动器v4.5 SP1的应用可用于现有
SINAMICS DCC V2.0 SPx.
Description
Article No.
Sinamics DCC v2.4 SP1
for STARTER V4.5 SP1
Graphic configuring with SINAMICS DCC
DCC Editor + DCB standard library
•Single-user engineering license,
with data carrier
6AU1810-1HA24-1XA0
•Upgrade engineering license,
with data carrier
6AU1810-1HA24-1XE0
DCB扩展许可
Runtime license for license upgrading
with firmware version V4.6 or later
(can also be ordered in conjunction with the
CompactFlash card,
see CompactFlash
card for CU310-2 and CU320-2 Control
Units
）
6SL3077-0AA00-0AB0
SINAMICS DCB Studio V1.2
编程块的开发工具
and DCB Extension libraries with firmware
版本v4.6或更高版本
On request
© Siemens AG 2017