SIEMENS
7/20
Siemens D 21.4 · 2017
SINAMICS S120 drive system
Control Units
CUA31控制单元适配器
7
■
Overview
CUA31控制单元适配器
The CUA31 Control Unit Adapter converts the PM-IF interface to
a DRIVE-CLiQ interface. The CUA31 Control Unit Adapter allows
Power Modules in blocksize format to operate on a Control Unit,
e.g. as a single axis next to a multi-axis drive. In this case, the
CUA31控制单元适配器must be the last device in the
DRIVE-CLiQ link from the viewpoint of the Control Unit.
■
Design
The CUA31 Control Unit Adapter features the following
connections and interfaces:
•
1 temperature sensor input for KTY84-130, Pt1000 or PTC
(Pt1000 can be used from firmware V4.7 HF17)
•
3 DRIVE-CLiQ sockets
•
1 connection for the electronics power supply via the 24 V DC
supply connector
•
1 Safe Stop input
The status of the CUA31 Control Unit Adapter is indicated via
multi-color LEDs.
■
Selection and ordering data
■
Technical specifications
Description
Article No.
CUA31控制单元适配器
Without DRIVE-CLiQ cable
6SL3040-0PA00-0AA1
Accessories for re-ordering
Dust protection blanking plugs
(50 units)
For DRIVE-CLiQ port
6SL3066-4CA00-0AA0
CUA31控制单元适配器
6SL3040-0PA00-0AA1
Current requirement, max.
at 24 V DC without DRIVE-CLiQ supply
0.15 A for CUA31 +
max. 0.5 A for
PM240-2 Power Module
• Conductor cross-section, max.
2.5 mm
2
Power loss, max.
2.4 W
PE connection
M4 screw
Dimensions
• Width
73 mm (2.87 in)
• Height
165.8 mm (6.53 in)
• Depth
37.3 mm (1.47 in)
Weight, approx.
0.31 kg (0.68 lb)
Certificate of suitability
cULus
© Siemens AG 2017