SIEMENS
12/8
西门子D 31 n·2016年3月
12
Engineering tools
Sinamics驱动器控制图（Sinamics DCC）
■
概述
Sinamics驱动器控制图（Sinamics DCC）扩展
设备功能的范围通过免费可用的闭合
loop control, arithmetic and logic blocks and offers a means by
which technological functions can be graphically configured in
the SINAMICS drive system. SINAMICS DCC is the first stage of
the Advanced Technology Function and is installed as an add-
使用开胃菜工具。
SINAMICS DCC provides users with greater scope to adapt
这些系统符合其机器的特定功能。
Sinamics DCC不会限制可以
be used. The number of functions is limited only by the perfor-
控制单元的MANCE能力。
Sinamics DCC可用于以下Sinamics Drive
systems:
•
Sinamics G130
•
Sinamics G150
•
Sinamics S120
•
Sinamics S150
•
SINAMICS DCM
•
SINAMICS DCP
•
Sinamics GM150
•
SINAMICS SM150
•
SINAMICS GL150
•
SINAMICS SL150
用户友好的DCC编辑器启用了简单的基于图形的简便
配置，允许控制循环结构清楚
represented and provides a high degree of reusability of
diagrams that have already been created.
The open-loop and closed-loop control functions are defined by
using multi-instance-capable blocks (Drive Control Blocks
（dcb）从库（dcb库）中选择并进行图形
ically linked with one another by dragging and dropping. Test
和诊断功能允许程序行为是
verified and, in the case of a fault, the cause identified.
有两种类型的DCB库，即DCB标准和
DCB Extension. The DCB Standard library supplied with
SINAMICS DCC contains a large selection of closed-loop, arith-
metic and logic blocks, as well as comprehensive open-loop
和闭环控制功能。
For logically combining, evaluating and acquiring binary
信号，所有常用的逻辑功能都可以使用
选择（以及，XOR，ON/OFF延迟，RS Flipflop，Counter等）。
多种算术功能，例如绝对值
generation, dividers and minimum/maximum evaluation are
available to monitor and evaluate numerical quantities. In
addition to the closed-loop drive control, axial winder functions,
PI controllers, ramp-function generators or wobble generators
简单配置。
In addition to the standard library, the DCB Extension library is
also available with SINAMICS DCC, firmware version V4.6 and
higher. This contains an extended range of blocks that can be
用作DCC编辑器中的附加独立库。
DCB扩展作为GMC提供新的运动控制块
library and blocks for supplementary mathematical and logical
用作数学扩展库。
Using these blocks, it is possible to implement the following
applications with SINAMICS DCC:
• Positioning
•
1:1 synchronous operation
• Gearing
•
齿轮和定位
• Camming
•
Flying saws
•
交叉切割机
•
Calculation of trigonometric or logarithmic functions
这些应用程序可从
Siemens Application Support pages at:
/sinamics-applications
With the blocks provided by DCB Extension, it is also possible to
委托特定用户块的编程。
SINAMICS DCC provides a convenient basis for resolving drive-
level open-loop and closed-loop control tasks directly in the
converter. This further extends the possibility of adapting
SINAMICS to the particular application. Local data processing in
驱动支持模块化的实现achine
concepts and results in an increase in the overall machine
performance.
最低硬件和软件要求
See STARTER commissioning tool.
■
选择和订购数据
SINAMICS DCC comprises the graphical configuring tool
（DCC编辑器）和DCB标准库。Sinamics DCC是
installed as an add-on to the STARTER commissioning tool.
每台PC的必要工程许可（浮动）
Sinamics DCC是acquired at the same time the order is placed.
DCB标准库不需要运行时许可证
included in the scope of supply.
Sinamics DCC v2.1和v2.2 SP1的现有许可证以及
v2.3也适用于Sinamics DCC v2.3 SP1。
An upgrade variant including an engineering license for
applications with STARTER V4.4 SP1 is available for existing
Sinamics DCC v2.0 SPX。
The blocks of the DCB Extension library are also configured with
the graphical configuring tool (DCC Editor). Use of these blocks
需要运行时许可证。
描述
Article No.
SINAMICS DCC V2.3 SP1
for STARTER V4.4 SP1
使用Sinamics DCC配置图形
DCC编辑 + DCB标准库
• Single-user engineering license,
with data carrier
6AU1810-1HA23-1XA0
• Upgrade engineering license,
with data carrier
6AU1810-1HA23-1XE0
描述
Article No.
Sinamics DCB扩展许可证
Runtime license for license upgrading with
固件版本v4.6或更高版本
(can also be ordered in conjunction with the
紧凑型卡片，
see CompactFlash
card for CU310-2 and CU320-2 Control
Units
)
6SL3077-0AA00-0AB0
©Siemens AG 2016