SIEMENS
12/7
Siemens D 31 N · March 2016
12
Engineering tools
STARTER commissioning tool
■
Selection and ordering data
Note:
In addition to the STARTER commissioning tool, SINAMICS Drive
Control Chart (SINAMICS DCC) can be installed. This allows the
device functionality in the SINAMICS drive system to be ex-
panded with technology functions as required.
M
ore information about SINAMICS DCC can be found in section
"SINAMICS Drive Control Chart (SINAMICS DCC)".
Accessories
Depending on the version of the Control Unit (CU), the Control
Unit of the drive unit can communicate with the programming
device (PG) or PC via PROFIBUS or PROFINET/Ethernet or via a
serial interface. The following accessories are available for the
particular drive system as listed in the following table.
■
更多的信息
The STARTER commissioning tool is also available on the
Internet at
/starter
1)
An overview of all the supplementary products (e.g. cables and connectors)
that are available for the distributed drives family can be found at the
following link:
/distributeddrives-supplementaryproducts
Description
Article No.
STARTER commissioning tool
for SINAMICS and MICROMASTER
English, French, German, Italian, Spanish
6SL3072-0AA00-0AG0
Description
Recommended
accessories
For communication
between the drive unit
and the programming
device or PC
Article No.
SINAMICS G110
• RS232
PC inverter connection kit
Scope of supply
:
9-pin SUB D connector
RS232 standard cable,
3 m (9.84 ft)
6SL3255-0AA00-2AA1
SINAMICS G120C
• USB
PC inverter connection kit 2
Mini USB interface cable for
communication with a PC,
3 m (9.84 ft)
6SL3255-0AA00-2CA0
SINAMICS G120
• USB
PC inverter connection kit 2
Mini USB interface cable for
communication with a PC,
3 m (9.84 ft)
6SL3255-0AA00-2CA0
• PROFIBUS
SIMATIC DP plug-in cable
12 MBaud, for PG connection,
pre-assembled with 2 × 9-pin
SUB D connector, 3 m (9.84 ft)
6 es7901-4bd00-0xa0
• PROFINET/
Ethernet
Standard CAT5 Ethernet cable
or PROFINET cable
–
SINAMICS G110M
• USB
PC inverter connection kit 2
Mini USB interface cable for
communication with a PC,
3 m (9.84 ft)
6SL3255-0AA00-2CA0
• PROFIBUS
Connection to the PROFIBUS
system in the plant
See supplementary
products
1)
• PROFINET/
Ethernet
Connection to the PROFINET
system in the plant
See supplementary
products
1)
SINAMICS G110D
• Optical USB
USB interface cable
For communication with a PC,
2.5 m (8.2 ft)
6SL3555-0PA00-2AA0
SINAMICS G120D
• USB
PC inverter connection kit 2
Mini USB interface cable for
communication with a PC,
3 m (9.84 ft)
6SL3255-0AA00-2CA0
• PROFIBUS
Connection to the PROFIBUS
system in the plant
See supplementary
products
1)
• PROFINET/
Ethernet
Connection to the PROFINET
system in the plant
See supplementary
products
1)
SINAMICS S110
• RS232
SIMATIC S7 connecting cable
Null modem cable,
6米(19.69 ft)
6ES7901-1BF00-0XA0
• PROFIBUS
CP 5711
communication module
USB adapter for connecting a
PG or notebook to
PROFIBUS or MPI
USB cable (2 m (6.56 ft))
included in scope of supply
6GK1571-1AA00
SIMATIC DP plug-in cable
12 MBaud, for PG connection,
pre-assembled with 2 × 9-pin
SUB D connector, 3 m (9.84 ft)
6 es7901-4bd00-0xa0
• PROFINET/
Ethernet
Standard CAT5 Ethernet cable
or PROFINET cable
–
SINAMICS S120
• RS232
SIMATIC S7 connecting cable
Null modem cable, 6 m (19.69 ft)
6ES7901-1BF00-0XA0
• PROFIBUS
CP 5711
communication module
USB adapter for connecting a
PG or notebook to
PROFIBUS or MPI
USB cable (2 m (6.56 ft))
included in scope of supply
6GK1571-1AA00
SIMATIC DP plug-in cable
12 MBaud, for PG connection,
pre-assembled with 2 × 9-pin
SUB D connector, 3 m (9.84 ft)
6 es7901-4bd00-0xa0
• PROFINET/
Ethernet
Standard CAT5 Ethernet cable
or PROFINET cable
–
Description
Recommended
accessories
For communication
between the drive unit
and the programming
device or PC
Article No.
© Siemens AG 2016