SIEMENS
SINAMICS GM150
Medium-Voltage Converter
SINAMICS GM150 in IGBT version
2/11
Siemens D 12 · 2012
2
■
选项
1)
选项
l ..
不能与选项组合
G61
(additional TM31 Terminal Module).
1)
使用转换器的ON命令，接触器是
关闭
, and with the OFF command, the contactor is
打开
(example: external fan on
the motor). The supply voltage for the auxiliaries must be provided externally.
1)
使用转换器的ON命令，接触器是
打开
, and with the OFF command, the contactor is
关闭
(example: heater).
必须在外部提供助剂的电源电压。
温度传感和评估
（标准：3 PT100输入）
L80
L81
L82
L90
L91
L93
L95
2热敏电机电机保护继电器，用于报警和故障
1)
L80
–
–
✓
✓
✓
✓
2 x 2 thermistor protection relays for alarm and fault
1)
L81
–
–
✓
✓
✓
✓
3 x 2 thermistor protection relays for alarm and fault
1)
L82
–
–
✓
✓
✓
✓
PT100评估单元，具有3个输入
1)
L90
✓
✓
✓
–
–
–
2 Pt100 evaluation units with 3 inputs each
1)
L91
✓
✓
✓
–
–
–
PT100评估单元具有6个输入和2个模拟输出
(outputs for display connected to the control system)
1)
L93
✓
✓
✓
–
–
–
Pt100 evaluation unit with 6 inputs for explosion-protected
电机和2个模拟输出
1)
L95
✓
✓
✓
–
–
–
Increased degree of protection of the control cabinets
在空气冷却版本（标准：IP22）
M11
M42
防尘
M11
✓
IP42 degree of protection
M42
✓
Increased degree of protection of the control cabinets
在水冷的版本中(standard: IP43)
IP54 degree of protection
M54.
Improvement in dust protection before commissioning
在水冷的版本中
Extended dust protection
M16
用于辅助的控制电机送料器
1)
N30.
N31.
N32.
N33.
用于辅助的控制电机送料器44.0/480 V 3 AC,
最大限度。4/4.8 kW
N30.
–
–
–
用于辅助的控制电机送料器44.0/480 V 3 AC,
最大限度。7/8 kW.
N31.
–
–
–
用于辅助的控制电机送料器44.0/480 V 3 AC,
最大限度。11 / 12.7 kW
N32.
–
–
–
用于辅助的控制电机送料器44.0/480 V 3 AC,
最大限度。15 / 17.5 KW
N33.
–
–
–
Controlled outgoing feeder for auxiliaries
1)
N35.
N36.
N37.
N38.
Controlled outgoing feeder for auxiliaries 230/120 V 1 AC,
最大限度。1.2 / 1 kW
N35.
–
–
–
Controlled outgoing feeder for auxiliaries 230/120 V 1 AC,
最大限度。2.2 / 1.5 kW
N36.
–
–
–
Controlled outgoing feeder for auxiliaries 230/120 V 1 AC,
最大限度。3.5 / 2.1 kW
N37.
–
–
–
Controlled outgoing feeder for auxiliaries 230/120 V 1 AC,
最大限度。4.5 / 2.8 kW
N38.
–
–
–
✓
选项can be combined
–
选项are mutually exclusive
©Siemens AG 2012