SIEMENS
SINAMICS SM150
Medium-Voltage Converter
SINAMICS SM150 in IGCT version
5/12
Siemens D 12 · 2012
5
■
Options
1)
Options
L..
cannot be combined with option
G61
(additional TM31 Terminal Module).
2)
Option
L94
and
L96
cannot be combined with options
G61
and
G62
(additional Terminal Modules TM31) as well as with option
E86
(additional analog inputs).
1)
With the ON command at the converter, the contactor is
closed
, and with the OFF command, the contactor is
opened
(example: external fan on the motor).
The supply voltage for the auxiliaries must be provided externally.
Temperature sensing and evaluation
(standard: 3 Pt100 inputs)
L80
L81
L82
L90
L91
L92
L93
L94
L95
L96
2热敏电阻电机保护继电器报警和fault
1)
L80
–
–
✓
✓
✓
✓
✓
✓
✓
2 x 2 thermistor protection relays for alarm and fault
1)
L81
–
–
✓
✓
✓
✓
✓
✓
✓
3 x 2 thermistor protection relays for alarm and fault
1)
L82
–
–
✓
✓
✓
✓
✓
✓
✓
Pt100 evaluation unit with 3 inputs
1)
L90
✓
✓
✓
–
–
–
–
–
–
2 Pt100 evaluation units with 3 inputs each
1)
L91
✓
✓
✓
–
–
–
–
–
–
3 Pt100 evaluation units with 3 inputs each
1)
L92
✓
✓
✓
–
–
–
–
–
–
Pt100 evaluation unit with 6 inputs and
2 analog outputs
(outputs for display connected to the control system)
1)
L93
✓
✓
✓
–
–
–
–
–
–
2 Pt100 evaluation units each with 6 inputs and
2 analog outputs
(outputs for display connected to the control system)
2)
L94
✓
✓
✓
–
–
–
–
–
–
Pt100 evaluation unit with 6 inputs for
explosion-protected motors and 2 analog outputs
(outputs for display connected to the control system)
1)
L95
✓
✓
✓
–
–
–
–
–
–
2 Pt100 evaluation units each with 6 inputs for
explosion-protected motors and 2 analog outputs
(outputs for display connected to the control system)
2)
L96
✓
✓
✓
–
–
–
–
–
–
Increased degree of protection of the control
cabinets in the water-cooled version (standard: IP43)
IP54 degree of protection
M54
Controlled motor feeder for auxiliaries
1)
N30
N31
N32
N33
Controlled motor feeder for auxiliaries 440/480 V 3 AC,
max. 4/4.8 kW
N30
–
–
–
Controlled motor feeder for auxiliaries 440/480 V 3 AC,
max. 7/8 kW
N31
–
–
–
Controlled motor feeder for auxiliaries 440/480 V 3 AC,
max. 11/12.7 kW
N32
–
–
–
Controlled motor feeder for auxiliaries 440/480 V 3 AC,
max. 15/17.5 kW
N33
–
–
–
✓
Options can be combined
–
Options are mutually exclusive
© Siemens AG 2012