SIEMENS
SINAMICS G180
Option descriptions
Standard options
4/5
Siemens D 18.1 · 2014
4
■
Options
(continued)
M94
Cable marking (shrink-on sleeve)
M94
Example of cable marking
•
电缆标记使用缩紧的袖子是武官d to the
cables.
•
The terminal designation and the item designation are labeled
on the cable.
Example:
Terminal –X2:41
→
Cable is marked with –X2:41.
E85
Board for mains supply backup
To enable the control voltage to be generated from the DC link
for the following converter types, option
E85
(series-connected
power supply unit for mains supply backup) is required.
This option must be ordered separately for all cabinet units and
for the following compact units:
Advantage:
When the converter control voltage is supplied from the DC link,
this provides a backup function for drives with a coupled rotating
mass (e.g. fan drive). This means that the DC link of the con-
verter is maintained for a short time in the case of a temporary
voltage drop or power failure due to continued rotation of the
rotating mass on the motor. The control voltage for the converter
is therefore backed up for a short time.
G01, G12, G20, G22 and G27
Additional boards for bus connection
Inadmissible option combinations
G01
,
G20
,
G22
,
G27
G01
Board for PROFIBUS DPV1
G01
PROFIBUS board for SINAMICS G180 in compact unit
G01
PROFIBUS board for SINAMICS G180 in cabinet unit
Option
G01
for the PROFIBUS DPV1 board is suitable for cyclic
and non-cyclic data transfer and can be retrofitted in compact
units and cabinet units at any time.
Type
Converter type
6SE0100-1A
■
23-4
■
A7
2T2A-07600-030
6SE0100-1A
■
24-2
■
A7
2T2A-07600-037
6SE0100-1A
■
25-0
■
A7
2T2A-07600-045
6SE0100-1A
■
25-8
■
A7
2T2A-07600-055
6SE0100-1A
■
28-0
■
A7
2T2A-07600-075
6SE0100-1A
■
31-0
■
A7
2T2A-07600-090
6SE0100-1A
■
31-2
■
A7
2T2A-07600-110
6SE0100-1A
■
31-4
■
A7
2T2A-07600-132
6SE0100-1A
■
31-7
■
A7
2T2A-07600-160
6SE0100-1A
■
32-1
■
A7
2T2A-07600-200
Additional boards for
bus connection
G01
G12
G20
G22
G27
Board for PROFIBUS DPV1
G01
–
–
–
PROFIBUS expansion module
for option G10 or G11
G12
Board for CANopen
G20
–
–
–
Board for Modbus RTU
G22
–
–
–
Board for Modbus TCP
G27
–
–
–
Options are combinable.
–
Options mutually exclude each other.
© Siemens AG 2014