SIEMENS
SINAMICS G180
Introduction
SINAMICS G180
1/4
Siemens D 18.1 · 2014
1
■
概述
The LOHER DYNAVERT T frequency converter integrated as
SINAMICS G180into the SINAMICS range has been deployed
对于最大可靠性的应用，超过四十年
驱动器的可用性是至关重要的。
SINAMICS G180thus benefits from the many years of expertise
acquired by LOHER Motors & Drives in the manufacture of mo-
TORS和转换器在变频器的范围内
are always systematically developed to take into account the
驱动系统整体要求。
SINAMICS G180转换器可以为标准提供
输出范围内的电压400,500和690V高达6.6mW。
They are available as a compact unit, a cabinet system or a
橱柜单元，空气或液体冷却，用于操作
synchronous and induction motors.
Output ranges of SINAMICS G180 (higher outputs with 400 and 500 V cabinet units available on request)
各种附加电气元件允许驱动器
系统以优化特定要求。配置是
greatly simplified by predefined interfaces and commissioning is
speeded up by the preassignment of parameter settings at the
factory.
The accuracy of the sensorless vector control makes the con-
验证许多类型的驱动器的理想伴侣，例如那些
used for pumps, fans, centrifuges, presses, extruders or com-
pressors, and an additional actual speed value encoder is
因此是多余的。
适当的编码器评估单位可用于
SINAMICS G180converters so that they can address applica-
需要编码器的植物特定原因的裁视。
SINAMICS G180可以灵活地集成到任何自动中
mation concept whether it employs a conventional control or a
巴士系统。
除标准转换器接口外（符合标准转换器接口
namur ne37），以下也可以作为选项提供
provide communication with the supervisory control system:
•
PROFIBUS DP
•
Modbus RTU.
•
Modbus TCP
• CANopen
•
Ethernet (PROFIBUS DP with Ethernet-PROFIBUS converter)
可选择可用的外围板可以选择添加
以下输入/输出到转换器：
•
数字和模拟输入和输出
•
2 PTC热敏电阻输入用于ATEX认证的电机温度
monitoring for motors in hazardous zones (prewarning/trip)
G_D024_EN_00002
SINAMICS G180
紧凑型单位
69.0 V
50.0 V
400 V.
SINAMICS G180
橱柜系统/
cabinet units
69.0 V
50.0 V
kW
400 V.
......
1200.
6
60.0
1000
900
800
71.0
63.0
55.0
50.0
400
31.5
250.
200
160.
132.
110
75.
90.
55.
45.
37.
30.
22.
15
11
7.5
5.5
4
3
2.2
©Siemens AG 2014