年代IEMENS
年代INAMICS G150 NEMA
Engineering information
4
年代iemens D11.7
(Part 1) – 2013
4/14
4/18
An overview of the SINAMICS Safety Integrated functions plus their boundary conditions is provided in the following table.
Function
Control
Underlying function
Reaction to
limit overshoot
Encoder
required
License
required
年代afety Basic Functions
年代TO
• EP terminals on the power
unit and digital input at the
CU3xx/D4xx/CX32
• PROFIsafe
• Terminal module (24 V to
230 V),option
K82
1)
年代BC (if activated)
–
No
No
年代年代1
• EP terminals on the power
unit and digital input at the
CU3xx/D4xx/CX32
• PROFIsafe
• Terminal module (24 V to
230 V), option
K82
1)
年代TO, after a parameterized
delay time has expired
年代TO
No
No
年代BC
• Via Safe Brake Adapter
2)
–
–
No
No
年代afety Extended Functions
年代TO
• Terminals on the TM54F
3)
• PROFIsafe
年代BC (if activated
–
Yes
4)
Yes
年代年代1
• Terminals on the TM54F
3)
• PROFIsafe
年代TO is activated after the
关闭条件
been fulfilled
年代TO
Yes
4)
Yes
年代BC
• Via Safe Brake Adapter
–
–
Yes
4)
Yes
年代LS
• Terminals on the TM54F
3)
• PROFIsafe
Up to four maximum speeds
for operation can be
parameterized
年代TO, SS1 or
年代OS (can be
parameterized)
Yes
4)
Yes
年代年代M
• Terminals on the TM54F
3)
• PROFIsafe
年代afe limit value monitoring in
both directions of rotation, no
independent drive response. A
safety-relevant signal for further
operation is generated.
–
Yes
4)
Yes
年代DI
• Terminals on the TM54F
3)
• PROFIsafe
–
年代TO, SS1 or
年代OS (can be
parameterized)
Yes
4)
Yes
1)
In addition for SINAMICS G150.
2)
年代afe Brake Adapter has been released from firmware version 4.4.
3)
For SINAMICS G150 as option
K87
.
4)
The Safety Integrated Extended Functions require two incremental encoders (TTL, HTL or SSI) and therefore two SMC30 Sensor Module
Cabinet-Mounted to evaluate the encoder signals (option
K50 +K52
).
年代afety integrated