SIEMENS
SINAMICS G150 NEMA
工程信息
4
西门子D11.7
(Part 1) – 2013
4/10
CBE20 Communication Board Ethernet
The CBE20 Communication Board (
option G33
），如果
• a CU320-2 DP (PROFIBUS) Control Unit, is to be connected
到Profinet-io网络
•CU320-2 DP（PROFIBUS）或CU320-2 PN（PROFINET）
Control Unit is to be connected to an EtherNet/IP network
• SINAMICS Link is to be used to directly exchange data
在几个CU320-2 DP（PROFIBUS）或CU320-2 PN之间
（PROFINET）控制单元不使用更高级别
控制系统。
The CBE20 is parameterized to operate in one of these
modes. In addition, the CBE20 allows Standard Ethernet
使用用于工程过程的TCP/IP通信
Profinet或
以太网/IP网络。
PROFINET
与CBE20通信委员会有关，Sinamics G150是
PROFINET设备在PROFINET的意义上，可以
执行以下功能：
•Profinet IO设备
•100 mbit/s完整双工
• Supports real-time classes of PROFINET IO:
-RT（实时）
-IRT (Isochronous Real-Time), minimum send cycle 500
s
• Connects to controls as PROFINET IO devices according to
富有的论文
•基于四个RJ45插座的集成4端口开关
PROFINET ASIC ERTEC400。最佳拓扑
(line, star, tree) can therefore be configured without
其他外部开关。
EtherNet/IP
EtherNet/IP (EtherNet Industrial Protocol) is an open
standard predominantly used in the automation industry.
EtherNet/IP is supported by the Open DeviceNet Vendor
Association (ODVA).
Sinamics链接
Sinamics链接可用于直接交换数据
在几个CU320-2 DP（PROFIBUS）或CU320-2 PN之间
（PROFINET）控制单元不使用更高级别
控制系统。Sinamics的可能申请
链接包括：
• Torque sharing for several drives
• Setpoint cascading for several drives
•通过材料网耦合的驱动器加载分布
•Sinamics G或Sinamics S与
CU320-2控制单元和Sinamics DC Master与CUD
控制单元。
仅CU320-2控制单元或CUD控制单元
the SINAMICS DC Master can be integrated into this
communication network.
通过适当parame SINAMICS链接激活terizing
the Control Units of the participants.
CBE20通信板插入选项插槽
on the CU320-2 Control Unit.
Integration