SIEMENS
3/52
Siemens D 11 · 2015
3
Sinamics G130
Drive converter chassis units
CU320-2控制单元和控制单元套件
■
概述
通信，开环和闭环控制功能 -
tions for the Power Modules are executed in a CU320-2 Control
单元。与高级控制系统的通信是
通过PROFIBUS DP或PROFINET形成。
The CU320-2 Control Unit and the associated CompactFlash
card can be ordered separately or as Control Unit Kit.
The Control Unit Kit comprises the CU320-2 Control Unit,
紧凑型卡和存储的驱动器软件。
■
Design
The CU320-2 Control Unit features the following connections
和接口标准：
•
fieldbus接口：
-CU320-2 PN：1个带有2个端口的Profinet接口
(RJ45 sockets) with PROFIdrive V4 profile
-CU320-2 DP：1 profidrive v4的Profibus接口
profile
•
4驱动器cliq插座用于与其他交流
Drive-Cliq设备，例如电源模块，终端模块
•
12个可参数化的数字输入（浮动）
•
8 parameterizable bidirectional digital inputs/outputs
(non-floating)
•
1 serial RS232 interface
•
1 interface for the BOP20 Basic Operator Panel
•
1 slot for the CompactFlash card on which firmware and
参数存储
•
1 slot to install an option module for the interface expansion
•
2 rotary coding switches for manually setting the PROFIBUS
address
•
1个用于调试和诊断的以太网接口
•
3个测量插座和一个参考基础
启用支持
•
1 connection for the electronics power supply via the 24 V DC
电源连接器
•
1 PE connection
•
1个接地连接
A shield connection for the signal cable shield of the option
模块位于CU320-2控制单元上。
The available option slot is used to expand the interfaces,
e.g. number of terminals.
Cu320-2控制单元的状态通过多种
颜色LED。
由于固件和集合参数存储在插件上
紧凑型卡片，可以更改控制单元的情况
the need for tools.
■
选择和订购数据
For further information on the CU320-2 Control Unit, please refer
到Sinamics低压工程手册。
■
Integration
CU320-2控制单元与con之间的通信
nected components takes place via DRIVE-CLiQ.
A DRIVE-CLiQ cable for connecting the CU320-2 to the
Sinamics G130converter is included in the scope of delivery
电源模块。
The BOP20 Basic Operator Panel can also be snapped onto the
CU320-2 Control Unit during operation for diagnostic purposes.
The CU320-2 Control Unit and other connected components are
commissioned and diagnosed with the STARTER commission-
ING工具和已安装的Sinamics支持包。
CU320-2 PN控制单元需要紧缩卡
with firmware as of V4.4.
CU320-2 DP控制单元需要紧缩卡
与V4.3固件。
描述
Article No.
CU320-2 PN Control Unit
没有压缩卡
6SL3040-1MA01-0AA0
CU320-2 DP Control Unit
没有压缩卡
6SL3040-1MA00-0AA0
PROFINET PN Control Unit Kit
comprising:
•CU320-2 PN控制单元
•
带有最新固件的CMPACTFLASH卡
• STARTER commissioning tool on
DVD-ROM
6SL3040-1GA01-1AA0
Profibus DP控制单元套件
comprising:
• CU320-2 DP Control Unit
•
带有最新固件的CMPACTFLASH卡
• STARTER commissioning tool on
DVD-ROM
6SL3040-1GA00-1AA0
Accessories
For CU320-2 PN:
工业以太网足球俱乐部
• RJ45 plug 145 (1 unit)
6GK1901-1BB30-0AA0
• RJ45 plug 145 (10 units)
6GK1901-1BB30-0AB0
• Stripping tool
6GK1901-1GA00
• Standard cable GP 2x2
6XV1840-2AH10
• Flexible cable GP 2x2
6XV1870-2B
•落后电缆GP 2x2
6XV1870-2D
• Trailing cable 2x2
6XV1840-3AH10
•海洋电缆2x2
6XV1840-4AH10
对于Cu320-2 DP：
Profibus连接器
• Without
PG/PC连接
6ES7972-0BA42-0XA0
• With
PG/PC连接
6ES7972-0BB42-0XA0
入门调试工具
在DVD-ROM上
6SL3072-0AA00-0AG0
Accessories for re-ordering
Dust protection blanking plugs
（50个单位）
用于密封未使用的驱动器-CLIQ端口
6SL3066-4CA00-0AA0
©Siemens AG 2015