西门子
3/3
西门子D 11·2015
3.
SINAMICS G130
驱动器转换器机箱单位
7.5.kW to 800 kW
■
Benefits
•
Particularly quiet and compact converters due to the use of
最先进的IGBT功率半导体和一个
innovative cooling concept.
•
Individual modules and power components can be replaced
快速且轻松，确保更高水平的植物利用 -
能力。已设计可更换的组件
它们可以快速轻松地更换。除此之外
“Web上的备件”互联网工具让您轻松查看备用
parts that are available for the particular order
（
/sow
）。
•
通过A轻松集成自动化解决方案
standard communications interface as well as a range of
模拟和数字接口。
•
使用Interactive的简单调试和参数化
menus on the AOP30 Advanced Operator Panel with graphic
LCD and plain-text display, or PC-supported using the
入门调试工具（
/起动机
）。
•
预设软件功能使调整转换器更容易
到个体植物。
•
All components, from individual parts to the ready-to-connect
cabinet, undergo rigorous testing throughout the entire
生产过程。这保证了高水平的功能
reliability during installation and commissioning, as well as in
operation.
■
应用
Variable-speed drives are ideal for all applications that involve
moving, conveying, pumping or compressing solids, liquids or
gases.
This means the following applications in particular:
•Pumps and fans
•压缩机
•挤出机和混合器
•Mills
■
设计
SINAMICS G130转换器内置单元提供机器
带有模块化驱动系统的构建器和工厂构造函数
可以对特定应用程序定制。
SINAMICS G130转换器内置单元主要由此组成
遵循模块化，独立组件：
•
Power Module
•
Control Unit
They may be located separately from one another or combined
in a single unit. The Power Module contains a slot for the Control
Unit.
The Power Modules are supplied with a DRIVE-CLiQ cable for
用于控制的24 V电源的通信和电缆
Unit. These cables are pre-assembled for installing the Control
Unit in the Power Module. If the two units are installed in separate
locations, the cables must be ordered in the appropriate lengths.
AOP30高级操作面板和数字BOP20
基本操作面板可用于调试和本地
operation.
预定义接口，通过终端块或CU320-2控制
Unit with either PROFIBUS or PROFINET, make commissioning
和控制the drive much easier. The interfaces of the
CU320-2控制单元可以补充附加模块 -
ules, such as the plug-in TB30 Terminal Board or the TM31 Ter-
minal Module.
If further customer interfaces are required for the communication
通过驱动器，必须提供外部24 V电源。
The following two figures provide assistance when assembling
所需的转换器组件。第一位的e shows the
SINAMICS G130驱动器的设计和各个组件。
The second figure is a flowchart containing the decision and se-
lection criteria required for the individual components.
© Siemens AG 2015