SIEMENS
2/11
Siemens D 11 · 2015
2
强调
SINAMICS G130和SINAMICS G150综合安全
■
概述
集成到驱动器中的安全功能可以大大减少
实施安全概念所需的努力。
安全集成功能以电子方式执行
therefore offer short response times compared to solutions with
外部执行的监控功能。
作为一个alternative to control via terminals and/or PROFIsafe, there
也是没有参数化某些安全功能的选项
selection. In this mode, these functions are permanently se-
lected after parameterization and a POWER ON.
例子：
"SLS without selection" can be used, for example, to monitor the
maximum speed to prevent the drive from exceeding a mechan-
ical speed limit. An F-DI does not have to be used when using
“没有选择的SLS”功能。
安全集成，无编码器
The Safety Integrated basic functions STO, SBC and SS1 can
be operated without encoder: two safety-capable incremental
使用安全性时需要编码器（HTL或TTL）
Integrated extended functions SLS, SDI and SSM.
These are each connected to an SMC30 Sensor Module Cabinet
（对于SINAMICS G150，FIRST SMC30选项
K50
, second SMC30
选项
K52
). The lowest possible velocity resolution for an
必须观察到HTL / TTL编码器系统。
进一步的信息包含在安全综合核实中 -
手册。
许可
The Safety Integrated basic functions do not require a license.
The Safety Integrated extended functions require a license for
每个轴都有安全功能。它无关紧要哪种安全功能 -
tions are used and how many.
The license for SINAMICS G130 can be ordered as option
F01
使用存储卡。随后的许可是可能的
控制单元套件。
A license required for SINAMICS G150 can be ordered at the
same time as option
K01.
.
安全制动适配器
The Safe Brake Control (SBC) function requires a Safe Brake
Adapter (option
K88
对于SINAMICS G150）。
The Safe Brake Adapter enables safe control of electro-mechan-
电机制动器。
安全制动适配器控制230 V AC制动器。SBC
功能监测制动器的控制，但不是它的机械
系统。
The converter controls the connected brake using the motor
holding brake function.
External surge suppressors are not required. The cable har-
nesses for connection to the Power Module are included in the
供货范围。
The brake is controlled in accordance with IEC 61508 SIL 2 and
en ISO 13849-1 PL D和第3类。
安全制动控制（SBC）
G_D213_EN_00090a
Brake
诊断
电机持有
制动
安全制动适配器
M
M
AC 230 V
©Siemens AG 2015