SIEMENS
4/10
Siemens D 11 · 2015
4
SINAMICS G150
Drive converter cabinet units
75 kW到2700 kW
■
选项
When ordering a converter with options, add the suffix
"-Z"
to the
article number and then the order code(s) for the desired op-
tion(s).
例子：
6SL3710-1GE32-1CA3-Z
+M07+D60+...
See also ordering examples.
Available options
订购代码
Version A
Version C
输入端选项
Use in the first environment according to EN 61800-3
C2类（TN系统或带接地中性点的TT系统）
1)
L00.
–
Clean Power version with integrated Line Harmonics Filter compact
2)
L01
–
线路接触器（用于电流
≤.
用于单个连接的800 A）
L13
–
浪涌抑制
L21
–
Scope of delivery without line reactor (for converters
≤.
500 kW）
L22
Line reactor
u
k
= 2% (for converters > 500 kW)
L23
主开关包括保险丝或断路器
L26.
–
快速入门（出于选项
L01
)
L76
–
EMC盾牌巴士
3)
(cable connection from below)
M70
PE busbar
3）4）
(cable connection from below)
M75.
–
输出侧选项
DV / DT滤波器Compact Plus电压峰值限制器
L07
–
电机反应堆
L08
–
DV / DT滤波器加压峰值限制器
2)
L10
–
Sine-wave filter (up to 250 kW at 380 ... 480 V, up to 132 kW at 500 ... 600 V)
L15
–
EMC盾牌巴士
3)
(cable connection from below)
M70
PE busbar
3）4）
(cable connection from below)
M75.
–
电机保护和安全功能
紧急关闭按钮安装在机柜门
L45.
–
紧急关闭类别0,230 V AC或24 V DC
L57.
–
紧急停止类别1,230 V AC
5）
L59.
–
EMERGENCY STOP Category 1, 24 V DC
5）
L60
–
Thermistor motor protection (alarm)
L83
–
Thermistor motor protection (trip)
L84
–
Pt100 evaluation unit
L86
–
绝缘监测
L87
–
保护程度增加
Degree of protection IP21
M21.
Degree of protection IP23
M23.
保护程度IP43
M43.
保护程度IP54
M54.
Mechanical options
基地100毫米高，RAL 7022
M06.
电缆 - 编制舱200 mm高，RAL 7035
M07.
Line connection from above
2)
M13
–
Motor connection from above
2)
M78.
–
Crane transport assembly (top-mounted)
M90
Option can be ordered
–
选项无法订购
Please refer to the selection matrix for information about possible option combinations.
2)
Applies to motor cable lengths < 100 m.
3)
Not available for converters > 1500 kW with power units connected in
平行线。
4）
此选项列为输入和输出端选项，但仅限于此选项
required once.
5）
This option is contained as standard in version A.
6）
The stopping requirements must be taken into account with this option. Addi-
tional braking units may be required.
©Siemens AG 2015