SIEMENS
3/57
Siemens D 11 · 2015
3
SINAMICS G130
Drive converter chassis units
补充系统组件> AOP30高级操作面板
■
概述
AOP30高级操作面板是输入/输出设备
对于SINAMICS系列的转换器，最好用于内阁 -
stallation.
It has the following characteristics:
•
Graphical backlit LCD display for plain text display and a bar
显示过程变量
•
led显示的the operating states
•
帮助函数描述故障的原因和补救措施
和警报
•
键盘控制在运行过程中的驱动器
•
Local/remote switchover for selecting the operating location
（分配给运营商面板或客户的控制优先级
终端块/通信通道）
•
用于输入设定值或参数值的数字键盘
•
Function keys for guided navigation in the menu
•
Two-stage safety strategy to protect against accidental or
unauthorized changes to settings.
- 从操作员面板操作驱动器可以是
disabled by the keyboard lock so that only parameter values
and process variables can be displayed on the operator
panel.
-
密码可用于防止未经授权的修改 -
转换器参数的阳离子。
•
前面板具有保护程度IP55
AOP30和SINAMICS驱动器通过RS232进行通信
具有PPI协议的串行接口。
The AOP30 may be omitted if the drive is only operated via
例如，PROFIBUS和不需要本地显示
cabinet. The AOP30 can then be used simply for commissioning
purposes and to obtain diagnostic information, in which case, it
is plugged into the RS232 interface on the CU320-2 Control Unit.
In this case, an external 24 V power supply (max. current
要求200 mA）是必需的。
分配串行插件电缆
■
Design
The AOP30 is an operator panel with graphical display and
membrane keyboard. The device can be installed in a cabinet
door which is between 2 mm and 4 mm thick.
Features:
•
显示绿色背光，分辨率240×64像素
•
Membrane keyboard with 26 keys
•
Connection for a 24 V power supply
•
RS232 interface
•
内部电池备份的时间和日期内存
•
4 LEDs to indicate the operating state of the drive:
- 奔跑绿色
- 警报黄色
- 故障红色
- Local/Remote green
■
Function
当前的经营状态，设定点和实际值，PA-
rameters, indices, faults and alarms are displayed on the display
panel.
德语，英语，法语，意大利语，西班牙语
and
中国人
是
stored on the CU320-2 Control Unit CompactFlash card as oper-
ator panel languages. The desired language must be down-
loaded to the AOP30 prior to commissioning. In addition to these
预装语言，
Russian
and
葡萄牙语
（巴西）是
还可用于后续安装。进一步的语言是
要求可以办到。
2
3
5
5
3
2
rxd.
TxD
m 0v.
m 0v.
TxD
rxd.
9-pole SUB-D
9-pole SUB-D
AOP30
X540
CU320-2
X140.
G_D011_EN_00068
©Siemens AG 2015