SIEMENS
8/71
Siemens IC 10 · 2017
Load Feeders and Motor Starters for Use in the Control Cabinet
Sirius 3RA6紧凑型起动器
Accessories
8
■
概述
Sirius 3RA6紧凑起动器的配件
以下配件专门用于
3RA6紧凑型起动器：
•
Infeed system for 3RA6:
请参阅第8/79页
•
AS-i add-on modules:
see page 8/77 onwards
“ As-Interface附加模块”
•
External auxiliary switch blocks: Snap-on auxiliary switch as
versions 2 NO, 2 NC and 1 NO + 1 NC with screw or spring-
type terminals; the contacts of the auxiliary switch block open
并与紧凑型起动器的主要触点共同关闭。
NC触点被设计为镜接触。
•
控制套件：援助手动关闭主要联系人
check the wiring and motor direction under conditions of
short-circuit protection
•
Adapter for screw fixing the compact starter,
包括推入凸耳
•
主电路终端：螺丝和弹簧型
terminals
•
Main circuit terminal for mixed connection methods:
Using the main circuit terminal for mixed connection methods
也可以从输入上的螺丝连接切换
side to spring-type connection on the outgoing side in the
主电路。
例如，这意味着几个紧凑的起动器可以是
并排安装，并使用成本效益
the three-phase busbars on the infeed side. The motors are
then connected directly by the quick and reliably contacting
spring-type connection method.
Accessories for UL applications
The terminal block for "Self-Protected Combination Motor
Controller", type E is available for complying with the clearance
and creepage distances demanded according to UL 508.
Accessories for infeed using three-phase busbar systems
三相母线可以用作简单的，节省时间的
并明确排列的手段喂养小天狼星3ra6紧凑型
带螺丝连接的初学者。电动机启动器保护器尺寸S00
and S0 can also be integrated.
The busbars are suitable for between two and five devices.
However, any kind of extension up to a maximum summation
current of 63 A is possible by clamping the tags of an additional
busbar (rotated by 180°) underneath the terminals of the respec-
最后一个电动机启动器保护器。
Motor starter protectors S00 and S0 of the 3RV2 series can be
combined in any way (without a special connecting piece).
电动机启动器保护器由适当的输液提供
terminals. Special infeed terminals are required for constructing
"Type E Starters" according to UL/CSA.
三相母线系统是手指安全的，但空虚
connection tags must be fitted with covers. They are designed
对于可能发生在输出侧的任何短路应力
连接的Sirius 3RA6紧凑型起动器或运动起动器
protectors.
60毫米系统的母线适配器
The compact starters are mounted directly with the aid of busbar
母线系统的适配器，中心为60毫米
清除以节省空间并减少进纸时间
and costs. These feeders are suitable for copper busbars with a
width from 12 to 30 mm. The busbars can be 4 to 5 mm or 10 mm
thick.
8我们母线系统可以装满一个最大值
summation current of 630 A.
“反向入门”版本需要一个设备持有人
侧躯干适配器，用于横向安装。
紧凑的起动器被捕获到适配器上，
连接在线侧。然后插入此准备的单元
directly onto the busbar system, and is thus connected both
机械和电气同时。
For more accessories such as incoming and outgoing terminals,
平坦的铜剖面等，
see Catalog LV 10
.
闭合控制柜门的操作配件
Door-coupling rotary operating mechanisms for standard and
emergency-stop applications are available for operating the
紧凑型起动器，带封闭的柜门。
Sirius 3RA6紧凑起动器的配件
IO-Link version
以下配件专门用于3RA64,
3RA65 compact starters:
•
The 4SI SIRIUS electronic module as IO-Link master allows for
the simple and economical connection of SIRIUS controls with
io-link（例如，多达四组4个紧凑的起动器）
多功能模拟ET 200S分布I/O系统。
•
并排安装的其他连接电缆
到四个紧凑的起动器
•
现场控制和诊断最多四个的操作员面板
compact starters coupled to each other
©Siemens AG 2016