SIEMENS
7/50
Siemens IK PI · 2015
Industrial Remote Communication
TeleControl Professional for the control center
PCS 7 TeleControl Operator System
7
■
Overview
Uniform process control for central and remote units
The PCS 7 TeleControl OS software packages offered for
OS runtime mode are tailored to the architecture of the
SIMATIC PCS 7 operator system. They support single-user
systems (single stations) as well as multi-user systems with
up to 12 servers/redundant pairs of servers and up to 32 clients.
■
Design
PCS 7 TeleControl OS servers and PCS 7 TeleControl OS single
stations can integrate both local SIMATIC PCS 7 automation sys-
tems and widely distributed outstations (RTUs) of a telecontrol
system into the process control.
Depending on the configuration of a PCS 7 TeleControl operator
system as single station or client/server combination (single or
redundant), the following software components are required:
Ordering data for SIMATIC PCS 7 OS Runtime licenses for
expanding the OS Runtime POs (single station/server) and
additional SIMATIC PCS 7 OS software components for PCS 7
TeleControl Operator Systems can be found in Catalog
ST PCS 7, Chapter "Operator system", section "OS software".
SIMATIC PCS 7 Industrial Workstations suitable as basic
hardware for configuration of an operator station as PCS 7
TeleControl OS single station, PCS 7 TeleControl OS server or
PCS 7 TeleControl OS client can be found in Catalog ST PCS 7,
section "Industrial Workstation/PC".
PCS 7 TeleControl OS software for single station,
server and redundant server
The software product PCS 7 TeleControl OS Runtime contains
the PCS 7 TeleControl OS software including the object library
with the PCS 7 TeleControl OS faceplates and symbols as well
as the Runtime license for operation on an OS single station
or OS server.
An additional PCS 7 TeleControl Driver license is required
for each telecontrol protocol used (SINAUT, DNP3,
IEC 60870-5-101/-104, Modbus RTU, S7 EDC) per PCS 7
TeleControl OS single station and per PCS 7 TeleControl
OS server.
The SIMATIC PCS 7 OS Software must be ordered separately.
You can find the SIMATIC PCS 7 OS software for OS single sta-
tion and OS server in section "Operator system", "OS software",
and the SIMATIC PCS 7 OS software for a redundant pair of
OS servers (including RS 232 cable, 10 m) in Catalog ST PCS 7,
section "Operator system", "OS redundancy".
Upgrade
Existing SIMATIC PCS 7 TeleControl OS Runtime Software V7.1
can be upgraded from V7.1 to V8.0 (incl. service pack) using the
SIMATIC PCS 7 TeleControl Upgrade Package. This is also suit-
able for upgrading the SIMATIC PCS 7 TeleControl OS Engineer-
ing Software V7.1. The SIMATIC PCS 7 ES and OS Software V7.1
combined in certain software products must be upgraded
separately to V8.0 (incl. service pack) using the upgrade pack-
年龄在渺位log ST PCS 7, sections "Upgrades for engineering
system" and "Upgrades for operator system".
Software required
SIMATIC PCS 7 architecture
OS single station
Client server
Client
Server not redundant
Server redundant
PCS 7 OS Software Single Station V8.0 (incl. SP)
see section "OS software" in the Chapter "Operator system"
•
–
–
–
PCS 7 OS Software Server V8.0 (incl. SP)
see section "OS software" in the Chapter "Operator system"
–
–
•
–
PCS 7 OS Software Server Redundancy V8.0 (incl. SP)
see section "OS software" in the Chapter "Operator system"
–
–
–
•
PCS 7 OS Software Client V8.0 (incl. SP)
see section "OS software" in the Chapter "Operator system"
–
•
–
–
PCS 7 TeleControl OS Runtime V8.0 (incl. SP)
•
–
•
• (2 licenses)
PCS 7 TeleControl Driver
(alternative)
SINAUT
•
–
•
• (2 licenses)
DNP3
•
–
•
• (2 licenses)
IEC 60870-5-101/-104
•
–
•
• (2 licenses)
Modbus RTU
•
–
•
• (2 licenses)
S7 EDC
•
–
•
• (2 licenses)
© Siemens AG 2014