SIEMENS
7/34
西门子IK PI·2015
7
■
Function
（继续）
Industrial Remote Communication
控制中心的遥控专业人员
中国工程软件
中国ST7配置软件
Sinaut ST7配置软件是独立的
configuration tool for the telecontrol system that can comprise
ST1, ST7 or DNP3 modules; it includes:
•
连接配置
•
Station management
•
中国ST1配置概述
First, the "Connection configuration" tool is used to define the
SINAUT stations (ST7 CPU, DNP3, ST7cc, ST7sc or ST1 device)
在其中需要连接。为此，
tool displays a list of all connections possible in the right-hand
side of a two-section window. The tool has generated the list
automatically using the network configured with NetPro (see
WAN Manager for SINAUT systems). The user moves the con-
nections actually required from the right-hand to the left-hand
使用弹出菜单的窗口。
“车站管理”工具提供的功能之一
is a list of all SINAUT devices. If necessary, station-specific
modifications can be made, e.g. the SINAUT station numbers
印第安纳州可以改变吗ividual devices, or message texts can
be configured to be sent as text messages. The station
management tool also handles configuring of the data frames
如果框架生成和评估是
由Tim执行（仅适用于Tims
TD7ONTIM功能）。该工具生成系统数据
来自配置数据的CPU和TIM的块（SDB）。
如果Sinaut TD7软件用于CPU，则该工具也
preprocesses the accounting and communication data blocks
for the CPUs, which it stores in the CPU block library together
with the blocks (FBs, FCs) which are essential to the CPUs for
中国交流。
这third tool, "SINAUT ST1 – Configuration overview" is only re-
quired for configuring systems which also feature SINAUT ST1
devices. This tool makes adjusting the addresses for SINAUT
ST1容易得多。
SINAUT ST7 diagnostics and service tool
除了用户熟悉的诊断功能
STEP 7, the SINAUT ST7 diagnostics and service tool also pro-
VIDE可以访问中西纳特特定的诊断信息。这
可以使用服务工具将新软件上传到
the TIM.
SINAUT TD7 library, blocks for the CPU
Sinaut TD7库是一个软件包，有块
the CPU (TD7onCPU), in which TD7onCPU can be used for ST1
和ST7系统，但不适合DNP3系统。包裹有
been designed so that it can run both on an S7-400 and on an
S7-300 CPU. Only a small number of blocks have been de-
signed specifically for the S7-300 or S7-400 CPU respectively.
在里面stations, the SINAUT TD7 software ensures that process
数据是在CPU和控制控制台之间传输的，例如
ST7cc, and from CPU to CPU in the event of changes. Connec-
tion, CPU or control center failures are displayed. A data update
对于所有参与的沟通合作伙伴，请自动执行
matically following debugging or startup of a CPU or of the con-
trol desk. A time stamp can be assigned to data messge frames
if required.
这package essentially comprises:
Basic and auxiliary blocks
这些块中的大多数总是需要CPU，一个小
数字是可选的。基本块处理中央任务
作为启动，监视连接和连接伙伴，
general requests, time management, handling communication
etc. The auxiliary blocks enter data frames, for example, in the
send buffer or fetch them from the receive buffer, handle send
and receive jobs for specific connections, or provide information
as a result of searches.
数据点典型
这se blocks are integrated into the CPU program on the basis
要传输的数据类型和数据量。在里面
数据更改的事件，它们创建消息帧或输出
received process data.
为了正确操作，TD7ONCPU软件包需要一个
西纳特生成的数据块数量
engineering software. These are:
中央会计数据库
This block contains all data required centrally, e.g. accounting
data for all communication partners as well as for all connections
to be managed.
Communication DBs
为每个连接创建一个单独的通信数据库
with a sending and receive mailbox and all data required for
controlling and monitoring this connection.
©Siemens AG 2014