SIEMENS
2/815
Siemens IK PI · 2015
2
■
Technical specifications
(continued)
PROFINET/Industrial Ethernet
Industrial PC
SIMATIC PALIP PC.
SIMATIC IPC477D
1)
The generation of the supply voltage by the line-side power supply
must be realized as safety extra-low voltage with safe electrical isolation,
isolated according to IEC 60364 4 41,
or as SELV according to IEC/UL/EN/DIN-EN 60950-1.
2)
For devices with retentivity
3)
对于明确的标签，以太网端口编号
enclosure. The numbering by the operating system can differ.
4)
Teaming can be set and initiated in the configuration interface. In teaming
operation, jumbo frames, e.g. for the camera application, are not
supported
Drive and storage media
SATA驱动器
1 slot
Solid-state drive
•1 x
80 GB; 2.5" SATA-SSD,
standard or
•1 x
160 GB; 2.5" SATA-SSD,
standard
Hard disk drive (HDD)
•1 x
250 GB, 2.5"-SATA-HD
CFast card
• 2 GB or
• 4 GB or
• 8 GB or
• 16 GB
DVD drive, RW
1 slot for devices with expansion
Graphics
Display, resolution
• 12" screen diagonal
with LED backlighting, resolution 1
280 x 800 pixels, WXGA
(Wide XGA)
• 15" screen diagonal
with LED backlighting, resolution 1
280 x 800 pixels, WXGA
(Wide XGA)
• 19" screen diagonal with
LED backlighting, resolution 1
366 x 768 pixels
• 22" screen diagonal with
LED backlighting, resolution 1
920 x 1 080 pixels
Touch controller
模拟电阻或电容式触摸
背光（MTBF）
LED
Half brightness life time, typical
Min. 50 000 h at 50 °C,
50 % brightness
Graphics controller
• Intel HD 2000 or
• Intel HD 4000
Graphics memory
• 32 … 512 MB shared memory
Resolutions, frequency, colors
• DVI-I:
640 x 480 … 1 920 x 1 200, 60 Hz
• DP display port:
1 920 x 1 200, 60 Hz
国际米兰faces
COM 1 and COM 2
卢比232，Max。115 kbps，9针，
sub-D connector
DVI
Connection of VDUs
使用DVI连接
Display port (DPP)
Connection of VDUs
with DPP connection
Keyboard
Connection via USB port
Mouse
Connection via USB port
USB
• Rear of device:
4 x USB 3.0, max. 2 high-current
at the same time
• Front of device (only with IPC477D
with 15", 19" or 22" display):
1 x USB 2.0, high-current
PROFIBUS/MPI
9-pole, 2 rows, electrically isolated,
子D套接字，兼容
CP 5622
• Transmission rate
9.6 Kbps…12 Mbps
• Operating modes
DP master: DP-V0, DP-V1
with SOFTNET-DP
DP slave: DP-V0, DP-V1
with SOFTNET-DP slave
PROFINET
3 x RJ45 interface,
CP 1616 compatible onboard
interface based on ERTEC 400
10/100 Mbps, electrically isolated
SIMATIC IPC477D
Ethernet
3)
• 2 x RJ45 connection,
Intel 82579LM and Intel 82574L
10/100/1000 Mbps,
electrically isolated,
teaming-capable
4)
or
• For PROFINET versions:
1 x Ethernet
Slot for PCIe expansion cards
仅针对具有扩展的设备：
1 x PCIe-x4 expansion card can be
used, max. permissible power loss: 5
W
Degree of protection
Degree of protection
• IP 20 to IEC 60529 (enclosure)
•IP 65（前）
Quality assurance
In accordance with ISO 9001
Electromagnetic compatibility
Emitted interference S
EN 61000-6-4;
CISPR 22 Class A;
FCC Class A
Immunity with regard to conducted
干涉on the supply lines
• ± 2 kV to IEC 61000-4-4; burst
• ± 1 kV to IEC 61000-4-5;
surge symmetrical
• ± 2 kV to IEC 61000-4-5;
surge asymmetrical
Noise immunity on signal lines
• ± 2 kV to IEC 61000-4-4;
burst, length > 3 m
• ± 1 kV to IEC 61000-4-4;
burst, length < 3 m
• ± 2 kV to IEC 61000-4-5;
symmetrical surge, length > 30 m
Immunity to static discharge
• ± 6 kV, contact discharge
at the front to IEC 61000-4-2
• ± 4 kV contact discharge
at the rear to IEC 61000-4-2
• ± 8 kV air discharge
to IEC 61000-4-2
Immunity to high radio frequency
干涉
•10 v / m，80 ... 1000 MHz
80 % AM to IEC 61000-4-3
• 1 V/m, 2 … 2.7 GHz
• 3 V/m, 2 … 2.7 GHz
• 10 V, 10 kHz … 80 MHz
to IEC 61000-4-6
Immunity to magnetic fields
• 100 A/m,
50/60 Hz to IEC 61000-4-8
Weight
• IPC477D, touch device, 12" display
approx. 3 200 g
• IPC477D, touch device, 15" display
approx. 4 920 g
• IPC477D, touch/key device
(without expansions), 15" display
approx. 5 750 g
• IPC477D, touch device, 19" display
approx. 6 400 g
• IPC477D, touch device, 22" display
approx. 7 000 g
SIMATIC IPC477D
© Siemens AG 2014