SIEMENS
2/675
Siemens IK PI · 2015
PROFINET/Industrial Ethernet
Accessories
SICLOCK Time synchronization
> Pulse converters
2
■
Overview
The pulse converter is available in three versions:
• SICLOCK PCON
• SICLOCK EOPC
• SICLOCK GPS1000 PS
SICLOCK GPS1000 PS, SICLOCK PCON and
SICLOCK EOPC pulse converters
SICLOCK PCON pulse converter
The SICLOCK
PCON is a single-channel, electrical-optical pulse
converter. It enables electrical and optical time frames and
脉冲分配。
The device has three inputs for electrical signals (RS 422,
RS 232, etc.), one optical input, as well as five electrical outputs
and one optical output. By using fiber-optic cables, longer
distances can be bridged with very high interference immunity.
The SICLOCK PCON pulse converter can be operated in two
modes:
•
In transparent mode, the input signal is output at all outputs
without any change.
•
In pulse mode, an edge change at the input triggers a pulse
with parameterizable length at all outputs.
The device is easily parameterized by means of DIP switches
located directly on the device.
SICLOCK PCON pulse converter (functional diagram)
SICLOCK EOPC pulse converter
The SICLOCK EOPC is an electrical-optical converter and hub.
It features two electrical inputs, which can be alternatively used,
and transfers these signals at its 32 fiber-optic outputs. This
pulse converter is therefore the ideal choice for applications with
numerous nodes with optical pulse interface which have to be
synchronized.
SICLOCK GPS1000 PS pulse converter
The SICLOCK GPS1000 PS pulse converter is always used
when a SICLOCK wireless receiver is used as stand-alone unit,
i.e. without a central plant clock. It fulfills two main functions:
•
On the one hand, the pulse converter is used as an energy
source for SICLOCK wireless receivers.
•
On the other hand, the device is used as a level converter.
time signal received at input 11/12 is output as RS 232 level
at the Sub-D interface X3.
Inputs X1
输出X2
RS 422 (non-isolated)
RS 422 (non-isolated)
RS 232 (non-isolated)
RS 232 (non-isolated)
Pulse input 5 ... 35 V or 5 ... 70 V
Pulse output 24 V (non-isolated)
Pulse output 24 ... 220 V (isolated)
FOC
FOC
BFOC connection system
BFOC connection system
TTY 20 mA current interface
Inputs X1
输出
TTY 20 mA current interface
32 x BFOC 62.5/125 μm
Pulse input 10 ... 65 V
Inputs
输出
TTY 20 mA current interface to the
wireless receiver
9-pole Sub-D RS 232 level
TTY 20 mA current interface
TTY-inverted 20 mA current interface
Digital logic
Alarm
DIP switch
Inputs
输出
SICLOCK PCON
pulse converter
SP01_00042
LWL
RS 485
RS 232
5 ... 35 V
35 ... 70 V
LWL
TTY
RS 485
RS 232
≥ 1
245 V
220 V
© Siemens AG 2014