SIEMENS
11/4
Siemens MD 31.1 · 2016
Appendix
Overview of order codes
11
■
Overview
(continued)
Order code
Description
Preservation
C00
5015年文化、天蓝色
C01
RAL 5009 azure blue
C02
RAL 5010 gentian blue
C03
RAL 1003 signal yellow
C04
RAL 1021 rape yellow
C05
RAL 1028 melon yellow
C06
RAL 6011 reseda green
C07
RAL 7031 blue gray
C08
RAL 7035 light gray
C09
RAL 7021 dark gray
C10
RAL 9005 jet black
C11
RAL 7030 stone gray
C12
RAL 7016 anthracite gray
C13
RAL 7011 steel gray
Acceptance
D97
Additionally with test report to EN 10204-2.2
Installation conditions
G29
Gear unit designed for low temperatures down to -40 °C
G30
Installation: Altitude up to 1000 m
G31
Installation: Altitude 1001 m to 2000 m
G32
Installation: Altitude 2001 m to 3000 m
G33
Installation: Altitude 3001 m to 4000 m
G34
Installation: Altitude 4001 m to 5000 m
G35
Installation location: Small, enclosed rooms
G36
Installation location: Large rooms, halls
G37
Installation location: Outdoors
G38
Installation at sea level
Information about oil
H00
Intended for mineral oil (oil not included in scope of supply)
H01
Intended for polyglycol-based synthetic oil (PG oil, oil not included in scope of supply)
H02
Intended for poly-alpha-olefin-based synthetic oil (PAO oil, oil not included in scope of supply)
H03
Intended for poly-alpha-olefin-based synthetic oil, suitable for ambient temperatures in excess of -35 degrees
(PAO oil, oil not included in scope of supply)
H04
With oil filling, synthetic PAO-based oil, mounting positions M1, M3, M5, M6, types O2 (n
2
20 rpm), O4, O5
H05
With oil filling, synthetic PAO-based oil, mounting positions M1, M3, M5, M6, types O2 (n
2
< 20 rpm or ATEX or Pt100)
H07
With oil filling, synthetic PAO-based oil, mounting positions M2, M4, all types
H08
With oil filling, mineral oil, mounting positions M1, M3, M5, M6, types O2 (n
2
20 rpm), O4, O5
H09
With oil filling, mineral oil, mounting positions M1, M3, M5, M6, type O2 (n
2
< 20 rpm or ATEX or Pt100)
H10
Oil viscosity ISO VG 460 (oil chamber planetary gear unit)
H11
Oil viscosity ISO VG 320 (oil chamber planetary gear unit)
H12
Oil viscosity ISO VG 220 (oil chamber planetary gear unit)
H15
With oil filling, mineral oil, mounting positions M2, M4, all types
H38
Dip lubrication
H39
Dip lubrication with oil expansion unit
Oil monitoring
H40
Oil temperature measurement by Pt100 resistance thermometer
H44
Oil temperature measurement by Pt100 resistance thermometer in ATEX design (Categories 2+3)
H51
Oil sight glass
© Siemens AG 2016