EAGLEBURGMANN
13
Features
PTFE gasket tape with high adaptability
and stability for extreme requirements such
as fragile equipment, large diameter steel
flanges with considerable unevenness
or very rough surfaces. ePTFE material
is distinguished by high adaptability and
simultaneously low cold flow as well as a
high dimensional stability.The high bi-axial
strength also provides high residual stress.
Advantages
Sealant tape of 100 % pure, virgin PTFE
with self-adhesive strip on the rear face.
Because of the special manufacturing
technique the result is a multi-directional
fibrillized structure (ePTFE), which
demonstrates extraordinary properties.
Operating range
Pressure (p): the pressure resistance
depends only on installation and operating
conditions. Please check our installation
and maintenance instructions.
Temperature: t = –240 °C ... +270 °C,
transient peak up to +315 °C
耐化学性:pH值= 0 ... 14
Forms of supply
Width: 10 ... 65 mm
Thickness: 2/3/6/9 mm
Supplied in rolls
Standards and approvals
• TA-Luft
• FDA 21 CFR 177.1550
• Physiologically harmless over long-
term temperature use up to +260 °C,
according to BG Nr. 21
• In accordance with EN 1514-1 for
thickness 2 mm
• Blow-out safety according to VDI 2200
class C
Notes
Easy installation on-site including cutting
to length or adjustment by hand. Severe
uneveness can be levelled by layering
and/or shimming. No holding time, no cure
time required. No aging of the sealing
tape. The adhesion depends on storage
and installation conditions.
Recommended applications
• Process industry
• Petrochemical industry
• Chemical industry
• Pharmaceutical industry
• Pulp and paper industry
• Food and beverage industry
• Sugar industry
• Resistant to all media, except diluted
and molten alkali metals as well as
elementary fluorine at t >150 °C and
p >40 bar
• Heat exchangers
• Covers
• Hatches
• Reactor vessels
• Process vessels
• Maintenance seals
Quick-Seal Multi 9654/MB
Characteristic values
AD-Guidelines B7:
K
O
x K
D
= 25 x b
D
K
1
= 2.5 x b
D
DIN 28090-1/prEN 13555:
σ
vu(TA-Luft)
/ Q
MIN(TA-Luft)
= 30 Mpa
σ
vu(40 bar; 001)
/ Q
MIN(O, 01)
= 25 Mpa
σ
vu(10 bar; 001)
/ Q
MIN(O, 01)
= 20 Mpa
σ
vu(class C)
/ Q
S MIN(class C)
= 10 Mpa
σ
bu
/ Q
S MIN(O, 01)
= 5 Mpa
σ
vo
/ Q
CRIT
= 180 Mpa
DIN 28090-2:
ε
KSW
= 39 %
20 °C
40 °C
60 °C
80 °C
150 °C
200 °C
0
5
10
15
20
25
30
35
40
Quick-Seal MultiTex tape gasket stress (Mpa)
Effective thickness (%)
100
90
80
70
60
50
40
30
20
10
0