DODGE
FEATURES/BENEFITS
B15-5
轴承参考
指导
UNIFIED SAF
E-Family Roller
Bearings
Specialty Tapered
Products
S-2000
Unisphere II
帝国
DODGE UNIFIED SAF with SPLIT-SPHER Bearing
The SPLIT-SPHER bearing is quick to install. Simplified
bearing installation puts equipment back into operation
更快并保持生产的发展。
这就是原因！
道奇提供了分裂的球形轴承，可配合SAF
housings and replaces bearing and adapter assemblies.
It’s a real cost-saver in every case where the shaft must
be stripped of components to permit sliding the new
轴承的轴上疯狂的ation.
尺寸是标准的。
The DODGE SPLIT-SPHER bearing has the same
O.D. dimensions as a standard spherical bearing. This
means you can use a SPLIT-SPHER pillow block on the
轴和标准枕头块无法访问的末端
on the accessible end. DODGE offers the only split-race
为标准的SAF枕头块尺寸制成的轴承。
Also, if needed, the backing dimension of the SPLIT-
可以通过闪光来满足Spher Block
requirements of any roller bearing it replaces.
SPLIT-SPHER BEARINGS FROM DODGE INCREASE PRODUCTION AND REDUCE
DOWNTIME
REDUCE REPLACEMENT TIME UP TO 50%.
To replace a standard spherical roller bearing with a
拆分插件，卸下盖子，抬高轴
enough to support the load and burn off the failed
bearing and adapter with a torch.
The DODGE SPLIT-SPHER replacement lower halves
can then be slipped under the shaft, along with the split
seals. Bolt the upper halves in place, lower the shaft and
replace the cap. There’s no need to remove any other
轴安装的组件或移动电动机和其他
笨重的机器。
1. Slightly elevate shaft, cut off
old bearing and slip lower
halves of SPLIT-SPHER
rings and roller assembly
beneath shaft
2.内环的螺栓上半部
到下半部
3. Place upper half of roller
装配处于适当的位置
外部上半上半部的螺栓
ring. Lower shaft and replace
住房帽。
拆分插件易于安装！