CHIORINO
< Previous chiorino products|Products index|Next chiorino products >
▸ they can be executed on thermoplastic conveyor and transmission belts
▸ no use of cements
▸ they guarantee ease of use and speed of execution:
a few minutes, using the equipment here shown
and following the jointing procedures ensuring
quality joints.
CHIORINO FAST JOINT KIT
With the Fast Joint Kit CHIORINO thermoplastic conveyorand transmission belts can be made endless in a fewminutes without the use of adhesivesin just four steps:
▸1: place the belt with prepared ends on the holding plate,
▸2: cover with the appropriate plate and fasten with
the fastening clamps,
▸3: press according to the times recommended in the
operating manual,
▸4: remove press and replace with cold clamp for cooling.
Description |
Dimensions wxlxh [mm] |
Weight [kg] |
|
F35 M |
Hand-operatedpuncher for MICRO-Z fingers of thermoplastic conveyor and transmission belts, up to 120 mm wide and a maximum of 4 mm thickness. |
220x215x130 |
1,3 |
Type |
Description |
Dimensions wxlxh [mm] |
Weight [kg] |
F80 ME |
Hand-operatedpuncher for SINGLE-Z fingers of conveyor and transmission belts, up to 80 mm wide and a maximum of 6 mm thickness. |
640x200x350 |
14 |
Type |
Description |
Dimensions wxlxh [mm] |
Weight [kg] |
P120 FJ |
Press with two heatedplatens, suitable for endless making of thermoplastic materials up to 80 mm wide and a maximum of 6 mm thickness. It can be supplied in a kit, along with holding plates, fastening and cooling 蛤ps. |
330x155x130 |
4 |
Plates’ sizes wxl(毫米) |
|||
100x140 |
Type |
Description |
Dimensions wxlxh [mm] |
Weight [kg] |
EL250 |
Type EL250 Press with 2 heated platens, suitable for endless making of thermoplastic polyurethane elastic belts (EL series) up to 200 mm wide and a maximum of 2 mm thickness. |
400x140x200 |
17 |
Plates’ sizes wxl(毫米) |
|||
230x25 |
26
Type |
Description |
Dimensions wxlxh [mm] |
Weight [kg] |
F700 M |
Hydraulic hand operatedpuncher, for SINGLE Z fingers on belts up to a maximum of 5,5 mm thickness. |
820x380x340 |
30 |
Type |
Description |
Dimensions wxlxh [mm] |
Weight [kg] |
B80 D |
Hand operated plateskiver for conveyor and transmission belts up to 80 mm wide and amaximum of 1,3 mm thickness. |
320x250x250 |
5 |
Type |
Description |
Dimensions wxlxh [mm] |
Weight [kg] |
B100 R |
Roller skiver without motor (B100 R) or with motor (B100 RM) for conveyor and transmission belts up to 100 mm wide with 90° straight cut and a maximum of 5 mm thickness. |
330x260x170 |
8,5 |
B100 RM |
570x260x250 |
25 |
Type |
Description |
Dimensions wxlxh [mm] |
Weight [kg] |
B300 SA |
Skiver ideal to obtain accurate skives with preset angle on belts and belting up to 300 mm wide with 90° straight cut and max. thickness 10 mm. |
550x600x450 |
42 |
Type |
Description |
Dimensions wxlxh [mm] |
Weight [kg] |
S15 |
Fast Joint welder for jointing PU round and V-belts. It can be supplied with 蛤p and pliers. |
160x90x110 |
3 |
26
Presses
27
27