CHIORINO
28
“Texgum”
roller
coverings
“Texgum” roller coverings are designed to increase the
coefficient of friction of rollers and are used mainly in the
weaving and finishing sectors of the Textile industry. They
are manufactured to the highest possible standards using
specially designed elastomers.
The comprehensive range is suitable for all types of
machinery and offers technical qualities such as:
▸high
quality
textile
carcass
with
very
good
dimensional stability even for wet processing;
▸high wear resistant covers in natural rubber, specially
formulated elastomers and silicones;
▸consistant quality due to the fully automated cycle of
production control.
Features
▸Textile carcass
: polyester fabric, except for the FG
类型(玻璃纤维),弗洛(非编织)。
▸
Self-adhesive version (/A)
: can be supplied for all
types, except for SI0-FG, SI2-FG.
▸
Roll’s width
: available in 50 - 70 mm. Other widths
upon request.
Recommendations for fitting
Clean rollers thoroughly by means of non oily solvent. To
wrap the roller covering spiral-wise, cut the end of the
覆盖斜的长度等于圆周
the roller. Apply the adhesive first to the roller and then
到Texgum覆盖并包裹后者仍然存在
slightly tacky. The silicone adhesive must be applied to the
roller only, taking care to wrap the covering on the roller
immediately. Then fix the ends of the covering by means of
an adhesive tape. Wait for 8 hours before use.
Adhesives
▸
Texcol
: for all types, except SI0-FG.
▸
Silicone
：对于Si0-FG。